Water temperature is an important part as it will give you to get the maximum oxygen levels with an improved nutrient uptake.
So be sure that you have an tempurature at 18-21c To use place the required water pump in your reservoir or header tank and connect
the outlet of the pump to the inlet connection on the chiller using flexible pipe.
Then using another piece of flexible pipe connect a length from the outlet of the chiller and place inside your tank.
Depending on what type of tank you have or system you are using it is better to have the inlet and outlet pipes in different locations for
maximum effectiveness: In a water butt always place the pump at the bottom and have the outlet pipe at the top.
In a 'tray' style reservoir like an NFT have the inlet at one end and the outlet at the other.
For RDWC Systems and similar always chill the 'brain' pot as the system constantly recirculates the nutrient solution around. 
Rated Voltage 220-240V
Rated frequency of 50Hz
Current 0.6A
power 150 watts (en / 20HP)
T ° water before cooling 28 ° C (room temperature 30 ° C)
Refrigeration time 20h
T ° water after cooling 16 ° C (water volume 100L)
T ° water after cooling 22 ° C (water volume 200L)
Refrigerant R134a
Coolant weight 110g
Debit 200-1000L / H
Weight 9.2kg
Dimensions 388x218x325mm


Shipping Weight 9.5000kg
Shipping Width 0.338m
Shipping Height 0.325m
Shipping Length 0.218m
Shipping Cubic 0.023947000m3

Be The First To Review This Product!

Help other Simply Hydroponics users shop smarter by writing reviews for products you have purchased.

Write a product review