The Bluelab Guardian Monitor constantly measures conductivity, pH and temperature levels, and displays it in an easy to read LED.
Many factors determine how fast plants take up nutrients; season, stage of growth, temperature, and available light, just to mention a few. And with these variables the critical elements of the hydroponic nutrient can readily change.
The Bluelab Guardian monitor makes the task of balancing these changes easier.
Adjustable display brightness
Three large easy to read displays
Green 'Plant Safe' LED display
Selectable values for conductivity and temperature
Simple push button pH calibration
No calibration required for conductivity and temperature
All settings are retained if the power is lost
Automatic temperature compensation
Mains power supply
Water resistant design
Bluelab 2 year guarantee (6 months on pH probe) The 'Plant Safe' green LED's constantly displays the three critical nutrient parameters;
conductivity (EC, CF, TDS or PPM)
allowing you to take a quick look at the monitor, and immediately see the precise levels of the nutrient solution.
The Bluelab Guardian monitor has a handy silent alarm function which can bring to your attention a possible problem. Simply set the optimum range you'd like your nutrient solution to be within. You can set temperature, pH and conductivity into the Guardian. Should the levels stray outside these ranges the unit's display will begin flashing alerting you to a possible problem.
The unit is mains powered so you don't need to mess around with batteries. It can be mounted in a convenient position close to your system, and the probes can be easily positioned in the nutrient reservoir with the suction holders.
pH 0.0 - 14.0
EC 0 - 5.0
Bluelab Guardian Instructions (pdf)
Be The First To Review This Product!
Help other Simply Hydroponics users shop smarter by writing reviews for products you have purchased.